Máy kiểm tra độ cứng Rockwell HR-430MS Mitutoyo, 810-194-21

Description

These are four economical Rockwell hardness testing machines to suit practically every application you need.
The Rockwell HR-200/300/400 offers you the following benefits:

• The newly designed frame provides maximum clearance for positioning the work piece, all you need is a flat table for mounting these testing machines.
• They are very simple to operate: the analogue type HR-210 uses an automatic presetting dial gauge.
• Digital models HR-430MR/MS use automatic steering wheel braking and load sequencing for easy handling.
• Digital models HR-320MS and HR-430MR/MS can use our Digimatic Mini-processor (DP-1VR) for printing results, and you can use an input tool (USB-ITN-E) to connect to a PC for data transfer, analysis and storage.
• You can perform Brinell hardness tests by using the following optional accessories:
  a Brinell indenter, a weight set and a measurement microscope.

  Model:	HR-430MS
  HR unit resolution:	0,1 HR
  Jominy-test capability:	Additional accessories required
  Anvil adaption:	Ø 19mm
  Max. specimen height:	180 mm
  Throat depth:	165 mm
  Max. specimen weight:	20 kg
  Approx. mass main unit:	49,9 kg
  Height:	Max. 180 mm (100 if cover is attached) mm
  Measuring depth:	Max. 165 mm (from the center of the endenter axis)
  Functions:	GO/NG, Hardness value offset, Hardness conversion, Data output, Calibration mode
  Standard:	JIS B 7726; ISO6508-2; ASTM E18
  Preliminary test force (N):	29,42; 98,07
  Test force Superficial (N):	147,1; 294,2; 441,3
  Test force Rockwell (N):	588,4; 980,7; 1471
  Preliminary test force setting:	Dial switching
  Rockwell Scale Diamond:	HRA; HRD; HRC
  Rockwell Scale Ball 1,5875 mm:	HRFW; HRBW; HRGW
  Rockwell Scale Ball 3,175 mm:	HRHW; HREW; HRKW
  Rockwell Scale Ball 6,35 mm:	HRLW; HRMW; HRPW
  Rockwell Scale Ball 12,7 mm:	HRRW; HRSW; HRVW
  Rockwell Superficial Scale Diamond:	HR15N; HR30N; HR45N
  Rockwell Superficial Scale Ball 1,5875 mm:	HR15TW, HR30TW; HR45TW
  Rockwell Superficial Scale Ball 3,175 mm:	HR15WW, HR30WW; HR45WW
  Rockwell Superficial Scale Ball 6,35 mm:	HR15XW, HR30XW; HR45XW
  Rockwell Superficial Scale Ball 12,7 mm:	HR15YW, HR30YW; HR45YW
  Description:	The HR-430MS is an economical Rockwell hardness testing machine to suit practically every application you need. The MS indicates the Rockwell and Rockwell Superficial testforce range. It offers you the following benefits: The frame was designed with great care to provide maximum clearance for positioning the work piece. All you need is a flat table for mounting these testing machines. Its outstanding robustness makes it perfect for even the roughest environments. The HR-430MS is very simple to operate. It uses automatic steering wheel braking and load sequencing for easy handling. This digital model can use our Digimatic Mini-processor (DP-1VR) for printing results, and you can use an input tool (USB-ITN-E) to connect to a PC for data transfer, analysis and storage. You can perform Brinell hardness tests, as indicated, by using the following optional accessories: a Brinell indenter and a measurement microscope.
  Resolution:	0,1 HR indication
  Test force selection:	Dial switching
  Test force application:	Automatic
  Test force duration:	Settable 1-99s.
  Data output:	Digimatic (SPC), RS-232C
  Display Unit:	Matrix backlight LCD
  Main unit dimensions:	214x512x780mm
  Brinell Scales indentation only Ball 1,0 mm:	HBW 1/10; HBW 1/30 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft)
  Brinell Scales indentation only Ball 10,0 mm:	HBW 10/100 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft)
  Gross Weight:	72000 [gram]
  Standard accessories:	810-39 Flat anvil Ø64mm  810-40 V-anvil outside diameter Ø40mm groove width 30mm 11AAB941 Water level 383876 Vinyl cover 357651 AC adaptor Indenters, reference materials and power cord not included
  Net weight:	49900 [gram]

* Models which can be connected to the MeasurLink measurement data network system are only HR-320MS, HR-430MR
and HR-430MS.